VOLVO
ECM-U010687 - Lost Communication With Glow Plug Control Module 1. Bus Signal / Message Failures. Missing message
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The code concerns the communication with glow plug control module 1, which controls the glow plugs when starting. The code is set when a message from the glow plug control module is missing, and it is checked after the engine has run for a while.
Mögliche Ursachen
- Damaged cables or connectors
- Damaged glow plug control unit
Was Sie tun können
- 1Read the code with a diagnostic tool and see whether it is active or only stored
- 2Check that the connectors to the glow plug control module and to the engine control module are secure and free from oxidation
- 3Look for chafed wiring to the glow plug control module and use a multimeter to check that it has no break
- 4If you have a diagnostic tool: activate the glow plugs and see or listen whether the module responds
- 5Have a workshop check the glow plug control module if the fault remains
Symptome, die Sie bemerken können2
- The engine is hard to start and cranks slowly, sometimes or all the time
- The engine is hard to start and cranks slowly on a cold start
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.