VOLVO
ECM-U012600 - Lost Communication With Steering Angle Sensor Module. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (26)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011Alle Motoren außer: B5254T5, B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2008–2009Nur Motor: B4204S3, B4204S4, D4204T
- Volvo S80 (2007–)2010Nur Motor: B4204S3, B4204S4, B4204T6, D4204T
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204S3, B4204S4, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2015Nur Motor: B4164T, D4162T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011Alle Motoren außer: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Alle Motoren außer: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, D4162T
- Volvo V70 (2008–)2008–2009Nur Motor: B4204S3, B4204S4, D4204T
- Volvo V70 (2008–)2010Nur Motor: B4204S3, B4204S4, B4204T6, D4204T
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204S3, B4204S4, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2, D4162T
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The engine control module (ECM) continuously receives steering angle information from the steering angle sensor module (SAS) over the CAN network. The code is set when communication with the steering angle sensor is disturbed or stops, or when the signal from it is faulty. The fault gives no noticeable symptoms for the driver.
Mögliche Ursachen
- Disturbances or breaks on the CAN network
- Fault in the steering angle sensor module (SAS)
Was Sie tun können
- 1Read the codes in the engine control module and the steering angle sensor module, and fix other CAN-related codes first
- 2Check that the fuses are intact
- 3Check the CAN connectors at the engine control module and the steering angle sensor for loose or corroded contacts
- 4Look for chafed or pinched CAN wires. Use a multimeter to check that they have no break or short to ground or supply voltage
- 5If you have a diagnostic tool: follow the steering angle in live data and check that the value changes smoothly as the wheel is turned from lock to lock
- 6Do not work on the steering system yourself. If the fault returns: have a workshop with diagnostic equipment check the steering angle sensor and the CAN network
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.