VOLVO
ECM-U014082 - Lost communication with Central Electronic Module (CEM). Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (37)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5
- Volvo S80 (2007–)2011Nur Motor: B6304T4, B6324S4, B6324S5, D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: B6304T4, B6324S4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2014Nur Motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: B6304T4, B6324S4, B6324S5, D5204T3, D5244T15
- Volvo V40 (2013–)2013Alle Motoren außer: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014Alle Motoren außer: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, B4204T11, D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4162T, D4204T5
- Volvo V60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2011Nur Motor: B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: B6304T4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Alle Motoren außer: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2014Alle Motoren außer: B4164T, B4164T2, B4204T11, B4204T7, D4162T, D4204T5
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, B4204T11, D4162T, D4204T5
- Volvo XC60 (2009–)2011–2012Alle Motoren außer: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7
- Volvo XC60 (2009–)2014–2015Alle Motoren außer: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo XC70 (2008–)2011–2013
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: B4204T11, D4204T5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors communication with the central electronics control module (CEM). Although the code names an incorrect or missing sequence counter, it is set when communication with the CEM stops. The cruise control is then switched off.
Mögliche Ursachen
- Break or short circuit on the CAN wires
- The communication wire is shorted to ground or supply voltage
- Contact resistance or oxidation in the connections
- Short circuit in the connections
- The engine control module is not intended for this car, for example a used module with different software or hardware
- A common fault on the CAN network, if several control modules have communication faults
Was Sie tun können
- 1Read the codes in the central electronics control module and fix them before going further
- 2Check the fuses and that the central electronics control module receives voltage
- 3Check the connectors on the CAN wires for contact resistance, oxidation and loose contacts
- 4Look for chafed wiring and use a multimeter to check that the CAN wires have no break or short to ground or supply voltage
- 5If the engine control module has been replaced: check that it is intended for this exact car
- 6If the fault returns: have a workshop with diagnostic equipment check the communication. Do not replace the central electronics control module unless a workshop has shown it is faulty
Symptome, die Sie bemerken können1
- The cruise control does not engage
Was der Fehler beeinflussen kann1
- The cruise control does not work while the fault remains
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.