VOLVO
ECM-U030041 - Internal Control Module Software Incompatibility. System Internal Failures. General checksum failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module (ECM) checks its configuration ID against the signal configuration broadcast by the central electronics control module (CEM) on CAN. Although the code is titled general checksum failure, it concerns a configuration ID that differs from the one the CEM sends.
Mögliche Ursachen
- Wrong configuration ID because the module is not intended for the car, for example a used module with different software or hardware
- Break in the CAN wires between the module and the CEM
Was Sie tun können
- 1Check that the module is intended for this specific car, especially if it is used or has recently been replaced
- 2Check the CAN wires between the module and the central electronics control module for chafing and loose contacts
- 3Use a multimeter to check that the CAN wires have no break or short to ground or supply voltage
- 4Have a workshop with diagnostic equipment check the configuration and reprogram the module if needed
Symptome, die Sie bemerken können2
- The cruise control does not engage
- Red warning symbol and text message in the display
Was der Fehler beeinflussen kann2
- The module shuts off from the CAN network (bus-off)
- The module still responds to diagnostic commands
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.