VOLVO
ECM-U040284 - Invalid Data Received from TCM. Bus Signal / Message Failures. Signal below allowable range
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (30)
- Volvo S60 (2011–)2011Nur Motor: B6304T4, D5204T2
- Volvo S60 (2011–)2012Nur Motor: B6304T4, D5204T3
- Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D5204T3, D5204T7
- Volvo S60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2011–2012Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013Alle Motoren außer: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014Alle Motoren außer: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D4204T14
- Volvo V60 (2011–)2011Nur Motor: B6304T4, D5204T2
- Volvo V60 (2011–)2012Nur Motor: B6304T4, D5204T3
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4, D5204T3, D5204T7, D82PHEV
- Volvo V60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Nur Motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Nur Motor: B4204T11, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Nur Motor: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) receives information from the transmission control module (TCM) over CAN. The code is set when the quality of the data received is too low to be considered reliable. Although the code is titled signal below allowable range, it concerns the quality of the data from the TCM.
Mögliche Ursachen
- Break in the communication wire
- Communication wire shorted to ground
- Communication wire shorted to supply voltage
- Contact resistance or oxidation in the connections
- Break in the connections or short circuit in the connections
- Fault in the transmission control module (TCM), which should be checked first
Was Sie tun können
- 1Check that the fuses are intact
- 2If you have a diagnostic tool: read the status indicators and freeze-frame values to see when the fault occurred
- 3Check the connectors in the wiring between the engine control module and the transmission control module for oxidation and loose contacts
- 4Use a multimeter to check that the communication wire has no break or short to ground or supply voltage
- 5If the fault returns: have a workshop with diagnostic equipment check the transmission control module
Symptome, die Sie bemerken können3
- Abnormally high fuel consumption
- The cruise control does not engage
- The cruise control does not hold the set speed and disengages
Was der Fehler beeinflussen kann1
- The cruise control cannot be activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.