VOLVO
ECM-U042600 - Invalid Data Received From Vehicle Immobilizer Control Module. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (39)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2012Alle Motoren außer: B5254T5, B6304T4
- Volvo S60 (2011–)2013Alle Motoren außer: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: B4204T6, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7, D5204T2, D5244T10
- Volvo S80 (2007–)2012Alle Motoren außer: B5254T10, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Alle Motoren außer: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Alle Motoren außer: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Nur Motor: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Alle Motoren außer: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Alle Motoren außer: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B4164T, D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4164T, D4162T, D4204T14, D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012Alle Motoren außer: B6304T4
- Volvo V60 (2011–)2013Alle Motoren außer: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Alle Motoren außer: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Alle Motoren außer: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: B4204T6, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7, D5204T2, D5244T10
- Volvo V70 (2008–)2012Alle Motoren außer: B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013Alle Motoren außer: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Alle Motoren außer: B4204T11, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Alle Motoren außer: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2010Alle Motoren außer: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: B4204T11, B6304T4, B6324S4, B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) continuously gets information from the CEM over CAN. The code is set if the communication is incorrect or missing, or if the immobilizer codes in the ECM and CEM cannot be read out or do not match. Before the engine is allowed to start, the codes are checked to ensure that they match.
Mögliche Ursachen
- Contact resistance or oxidation in the connectors
- Open circuit in one of the CAN network cables
- One of the CAN network cables is short-circuited to ground, to voltage or to another cable
- Incorrect immobilizer code in the engine control module (ECM) or the central electronic module (CEM)
- Damaged engine control module (ECM)
- A module from a different vehicle has been fitted
Was Sie tun können
- 1Read the fault codes in the CEM and remedy any faults there first. Erase the code only after the CEM and other affected modules are fixed.
- 2Check that the connectors in the CAN network are secure and clean. Gently wiggle the wiring and connectors to see whether the fault appears.
- 3Has the engine control module or the CEM been replaced recently? Programmed modules cannot be moved between vehicles, so tell the workshop.
- 4Have a workshop check the immobilizer codes. After repair, reconnect parts, switch the ignition on and start the engine.
Symptome, die Sie bemerken können4
- The engine does not start, either always or sometimes
- The starter motor turns but the engine does not start
- The starter motor does not turn and no clicking sound is heard at a start attempt
- Warning symbol and message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.