Was bedeutet der Fehlercode ECM-U210881?

Diagnose und Fehlercodedefinition für ECM-U210881 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S80 (2007–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-U210881 - Adaptive Cruise Control. Bus Signal / Message Failures. Invalid serial data received

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (12)

Was bedeutet der Fehlercode?

The closing velocity module (CVM) is part of City Safety and can request speed reduction from other control modules over CAN. The ECM can receive a torque limiting request from the CVM. The code is set when the signal about requested speed reduction from the CVM is lost. Although the fault is named invalid data, the signal is in fact missing. The code in the ECM is a follow-on fault.

Mögliche Ursachen

The fault is in the closing velocity module (CVM)

Was Sie tun können

1Read the fault codes in the engine control module. If any of ECM-U012088, ECM-U000188, ECM-U1A1400, ECM-U000108 or ECM-U000100 is stored, investigate it first.
2Read the fault codes in the CVM and remedy them there first, as the engine control module code is then a follow-on fault.
3Erase the fault codes once the root fault is remedied, then check on a test drive whether the code returns.
4If the code returns, have a workshop troubleshoot the CVM, since it can request speed reduction.

Symptome, die Sie bemerken können1

The check engine lamp lights up or behaves abnormally

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.