VOLVO
EFI-0012 - Volume air flow (VAF) sensor
System
Elektronische Kraftstoffeinspritzung (EFI)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
2 ModelleS40 (1996–2004), V40 (1996–2004)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The volume air flow sensor measures how much air flows into the engine, and the engine control module uses this value to control fuel injection. The code is set when there is a fault in the sensor or its wiring, and the engine then runs only on a rich mixture of fuel and air.
Mögliche Ursachen
- Defective volume air flow (VAF) sensor
- Open circuit in the signal cable
- Signal cable short-circuited to ground or supply voltage
- Contact resistance
Was Sie tun können
- 1Read the other fault codes in the engine control module. If any of EFI-0012, EFI-0013, EFI-0021, EFI-0025, EFI-0056 or EFI-0066 is also stored, investigate it first.
- 2Check that the connectors to the air flow sensor and the control module are secure and free from contact resistance and oxidation.
- 3With a multimeter, check that the signal wire is not broken and not short-circuited to ground or voltage.
- 4If you have a diagnostic tool, read the air flow value in live data with the engine idling. The value should rise when the accelerator is pressed.
- 5If no fault is found in the wiring, the air flow sensor needs replacing. Have a workshop do this.
Symptome, die Sie bemerken können1
- The malfunction indicator lamp lights up
Was der Fehler beeinflussen kann3
- The engine runs only on a rich fuel and air mixture
- Closed-loop control is not active
- Ignition and fuel injection are instead controlled from the throttle position sensor and the flywheel sensor values
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.