VOLVO
EFI-0013 - Intake air temperature (IAT) sensor. Faulty signal
System
Elektronische Kraftstoffeinspritzung (EFI)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS40 (1996–2004), V40 (1996–2004)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The intake air temperature sensor measures the temperature of the air entering the engine. The code is set when the signal from the sensor is faulty, which may be caused by a defective sensor, a short-circuit in the signal wire, or an open circuit in the wire.
Mögliche Ursachen
- Defective intake air temperature (IAT) sensor
- Signal wire short-circuited to ground or supply voltage
- Open circuit in the signal wire
- Contact resistance
Was Sie tun können
- 1Check the connectors to the intake air temperature sensor and the control module for contact resistance and oxidation, and remedy them.
- 2With a diagnostic tool, read the intake air temperature with the ignition on. It should match the outside air after the car has stood.
- 3With a multimeter, check that the signal wire is not broken and not short-circuited to ground or voltage.
- 4If no fault is found, the temperature sensor needs replacing. Have a workshop do the replacement.
Symptome, die Sie bemerken können1
- The malfunction indicator lamp lights up
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.