VOLVO
EPS-0082 - Engine status. Faulty signal
System
Elektrische Servolenkung (EPS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The power steering receives information from the engine control module (ECM) over the CAN network that the engine is running. The fault code is set when the engine status signal or the engine speed signal from the engine control module is wrong or missing. The fault therefore lies in the engine control module, and the code is set there first.
Mögliche Ursachen
- Fault in the engine control module (ECM), which sends the engine status and speed
Was Sie tun können
- 1Read the fault codes in the engine control module (ECM) first and remedy them there
- 2Clear this fault code only after the fault in the engine control module has been remedied and cleared
- 3Road test the car and read the fault codes again to see whether this code returns
Symptome, die Sie bemerken können1
- No symptoms noticeable to the driver
Was der Fehler beeinflussen kann1
- With the ignition on the pump motor starts, which gives power steering even when the engine is not running
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.