VOLVO
EPS-E003 - Configuration fault. Faulty configuration
System
Elektrische Servolenkung (EPS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
Was bedeutet der Fehlercode?
The control module compares its configuration with the one that the central electronic module (CEM) sends on the CAN network. The fault code is set when they do not match, or when communication with the CEM is interrupted. One possible cause is a control module meant for another car, such as a used module with different software or hardware.
Mögliche Ursachen
- Wrong CAN configuration ID: a used module from another car with different software or hardware
- Open circuit in the CAN wiring between the power steering module and the central electronic module (CEM)
Was Sie tun können
- 1Read the fault codes in the central electronic module (CEM) and remedy them first
- 2Has the module recently been replaced without new software being downloaded? If so, that may be the cause
- 3Programming and software download is a workshop task: have a workshop download the correct software to the module that set the fault code
- 4Check that the connectors in the CAN network between the power steering and the CEM are secure and free from oxidation
- 5Power steering affects how easily the car can be steered, so have a workshop fix the fault soon
- 6If the fault code returns after these checks, have a workshop replace the faulty control module
Symptome, die Sie bemerken können4
- Abnormally light steering at high speed
- Abnormally heavy steering at low speed
- General warning lamp is lit
- A message appears in the display
Was der Fehler beeinflussen kann1
- The pump motor may run at a constant speed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.