VOLVO
GDM-0005 - Control module. Signal too high
System
Gasverteilungsmodul (GDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS40 (1996–2004), V40 (1996–2004)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The xenon lamp control module has received a signal value that is too high. The circuit in the module has become too hot and may have been damaged. The headlamps are set to their lowest position.
Mögliche Ursachen
- Defective control module
Was Sie tun können
- 1Clear the fault codes and switch on the dipped beam, since the xenon lamp control module only communicates with the dipped beam on cars without automatic dipped beam
- 2Wait a while and then read the fault codes again
- 3If the fault code returns, have a workshop replace the control module and calibrate it
Symptome, die Sie bemerken können1
- The headlamp motor does not work
Was der Fehler beeinflussen kann1
- The headlamps are set to their lowest position
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.