VOLVO
GDM-0006 - Control module. Not calibrated
System
Gasverteilungsmodul (GDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS40 (1996–2004), V40 (1996–2004)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The fault code is set in a new control module that has not yet been calibrated. It cannot be cleared by hand and disappears automatically once the calibration is complete. The headlamps stay in their lowest position until then.
Mögliche Ursachen
- The control module is not calibrated
Was Sie tun können
- 1Switch on the dipped beam and start the car, since the control module only communicates with the dipped beam on cars without automatic dipped beam
- 2Have a workshop calibrate the control module, since calibration is a workshop task
- 3After calibration, check that the fault code has gone
Symptome, die Sie bemerken können1
- The headlamp motor does not work
Was der Fehler beeinflussen kann1
- The headlamps are set to their lowest position
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.