VOLVO
GDM-0007 - Control module. Programming error
System
Gasverteilungsmodul (GDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS40 (1996–2004), V40 (1996–2004)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The module's programmable memory (EEPROM) holds too little or wrong data, which means it is incorrectly programmed. The fault code cannot be cleared by hand and disappears once programming is complete. The headlamps stay in their lowest position until then.
Mögliche Ursachen
- The control module is incorrectly programmed
Was Sie tun können
- 1Do not try to clear the code yourself: it disappears by itself when programming is complete
- 2Have a workshop reprogram the control module, since programming is a workshop task
- 3If reprogramming does not help, have a workshop replace the control module and calibrate it
- 4After the work, check that the fault code has gone
Symptome, die Sie bemerken können1
- The headlamp motor does not work
Was der Fehler beeinflussen kann1
- The headlamps are set to their lowest position
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.