VOLVO
ICM-B100E87 - Video Input "A". Bus Signal / Message Failures. Missing message
System
Infotainment-Steuermodul (ICM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
Depending on the equipment fitted, the infotainment control module (ICM) exchanges a composite video signal with the television module and/or the rear seat entertainment. The code is set when ICM finds that the video signal from video input A is absent. Although the code is named message missing, it is the video signal itself that is missing.
Mögliche Ursachen
- Sync signal from the CVBS video input reaches the control module incorrectly
- Loose connection on the composite video cable (CVBS) where it meets the control module
- Damaged wire running from the control module to the CVBS video input
Was Sie tun können
- 1Check that the fuses are intact. Their locations are given in the owner's manual or the fuse box cover
- 2Test the affected functions with the buttons, controls or a test drive to see whether a picture appears
- 3Check that the connectors at video input A and at the television module or rear entertainment are firmly seated and free from oxidation
- 4With a multimeter, confirm the video wire has no open circuit or short to earth. If you have a diagnostic tool, run the quick test and see whether the code returns
Symptome, die Sie bemerken können3
- Other video problems
- Poor image quality or no picture on the front screen
- Rear seat entertainment does not work, works only partly or works incorrectly
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.