VOLVO
ICM-B100E8F - Video Input "A". Bus Signal / Message Failures. Erratic
System
Infotainment-Steuermodul (ICM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The video signal at video input A, running between the infotainment module (ICM) and the television module or rear entertainment, is faulty, and the fault comes and goes. The code is set when ICM finds the signal is not correct during the test. The fault shows up at irregular intervals, so the picture can be fine for a while and then disturbed again.
Mögliche Ursachen
- Sync signal from the CVBS video input reaches the control module incorrectly
- Loose connection on the composite video cable (CVBS) where it meets the control module
- Damaged wire running from the control module to the CVBS video input
Was Sie tun können
- 1Check that the fuses are intact. Their locations are listed in the owner's manual or on the fuse box cover
- 2Test the functions with the buttons and controls, or drive the car, and note whether the picture gets worse at certain times
- 3Check that the connectors at video input A and at the TV module or rear entertainment are seated and oxide-free. Gently move them while watching the picture
- 4Inspect the video cable for chafing and breaks where it passes edges or moving parts. With a diagnostic tool, run the quick test and check whether the code returns
Symptome, die Sie bemerken können3
- Other video problems
- Poor image quality or no picture on the front screen
- Rear seat entertainment does not work, works partly or works incorrectly
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.