VOLVO
ICM-B101087 - Video Input "C". Bus Signal / Message Failures. Missing message
System
Infotainment-Steuermodul (ICM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
ICM talks to the front parking assistance camera through a composite video signal on video input C. The code is set when ICM finds that the video signal is absent. The camera and its wiring harness on the right-hand side of the tunnel are therefore the first parts to check.
Mögliche Ursachen
- Sync signal from the CVBS video input reaches the control module incorrectly
- Loose connection on the composite video cable (CVBS) where it meets the control module
- Damaged wire running from the control module to the CVBS video input
Was Sie tun können
- 1Inspect the cabling tucked behind the front panel on the right side of the tunnel for chafing, breaks and loose connectors
- 2Check the fuse that belongs to the wiring harness. Its position is given in the owner's manual or on the fuse box cover
- 3Use a multimeter to confirm the wire to the camera has continuity and is not shorted to earth. With a diagnostic tool, run the self-test and check whether the code returns
- 4If the wiring harness and fuse are intact, the camera may need replacing. Have a workshop do that
Symptome, die Sie bemerken können4
- Other video problems
- Poor image quality or no picture on the front screen
- Parking assistance camera does not work, works partly or works incorrectly
- Rear entertainment does not work, works partly or works incorrectly
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.