VOLVO
ICM-B108783 - LIN Bus A. Bus Signal / Message Failures. Value of signal protection calculation incorrect
System
Infotainment-Steuermodul (ICM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The steering wheel buttons send their signals to the infotainment control module (ICM) over the LIN bus, and ICM monitors their status. The code is set when the message received does not match the expected one, for example because a checksum is wrong. Fault-finding should then start at the module that transmits the signal.
Mögliche Ursachen
- The fault lies in the module that transmits the steering wheel button message
Was Sie tun können
- 1Check that the fuses are intact. Their locations are given in the owner's manual or on the fuse box cover
- 2Try the steering wheel audio and radio buttons and note which respond and which do not
- 3With a diagnostic tool, read the steering wheel button status in live data and check that the value changes when each button is pressed
- 4If other LIN fault codes are stored in the infotainment system, such as ICM-B108786 or ICM-B108788, work through those first. They point at the LIN bus rather than one specific unit
Symptome, die Sie bemerken können2
- Steering wheel buttons for the radio do not work
- Steering wheel buttons for the audio do not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.