Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    IEM-B200013
    VOLVO

    IEM-B200013 - Electric Machine Connector. General Electrical Failures. Circuit open

    System

    Unbekanntes System / Herstellerspezifisch

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    1 Modell

    V60 (2011–)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo V60 (2011–)2013–2014Nur Motor: D82PHEV
    • Volvo V60 (2011–)2015Nur Motor: D82PHEV, D87PHEV

    Was bedeutet der Fehlercode?

    The IEM control unit keeps watch over the voltage and current feeding the electric rear axle (ERAD). The code indicates an open circuit in the connection to the electric machine. The car then cannot be driven electrically by the rear axle.

    Mögliche Ursachen

    • The high-voltage wiring to the voltage converter (ISC) is unplugged or loosely connected
    • Loose contacts, contact resistance or oxidation where the electric rear axle (ERAD) joins the voltage converter (ISC)
    • Open circuit in the high voltage cable
    • High voltage cable short-circuited to ground
    • Damaged wiring between the electric rear axle (ERAD) and the voltage conversion unit (ISC)
    • Defect inside the voltage converter (ISC)

    Was Sie tun können

    1. 1Have a workshop check that the high voltage cable is connected and seated in the voltage conversion unit (ISC)
    2. 2Have a workshop look for open circuits, earth faults and damaged wiring between the electric rear axle and the voltage conversion unit. High voltage systems may only be handled by qualified personnel
    3. 3Do not work on the high voltage cabling or the connectors to the electric rear axle yourself
    4. 4After the repair, check that the code is not stored again and that electric propulsion works as normal

    Symptome, die Sie bemerken können4

    • Warning symbol and text message in the display
    • Drive mode PURE disengages automatically or is not available
    • Drive mode AWD disengages automatically or is not available
    • Drive mode HYBRID: the combustion engine runs all the time or too often

    Was der Fehler beeinflussen kann2

    • Electric propulsion is not possible
    • Brake energy regeneration from the electric rear axle is not possible

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.