Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    IEM-B200615
    VOLVO

    IEM-B200615 - Electric Machine Temperature Sensor. General Electrical Failures. Circuit short to battery or open

    System

    Unbekanntes System / Herstellerspezifisch

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    1 Modell

    V60 (2011–)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo V60 (2011–)2013–2014Nur Motor: D82PHEV
    • Volvo V60 (2011–)2015Nur Motor: D82PHEV, D87PHEV

    Was bedeutet der Fehlercode?

    The code means that the signal from one of the temperature sensors in the electric rear axle (ERAD) is too high. This may be caused by the signal cable being short-circuited to supply voltage or by a break in the cable. The control module (IEM) sets the code when the reading from the sensor falls outside the normal range. The performance of the rear axle is then reduced.

    Mögliche Ursachen

    • Loose contacts, contact resistance or oxidation at the joints between the ERAD and the voltage converter (ISC)
    • Signal cable short-circuited to supply voltage
    • Open circuit in the signal cable
    • Damaged wiring between the ERAD and the ISC
    • Damaged temperature sensor in the ERAD
    • Internal fault in the voltage converter (ISC)

    Was Sie tun können

    1. 1If you have a diagnostic tool: read the temperature values from the electric rear axle in live data and see whether one sensor reads abnormally high compared with the other
    2. 2Have a workshop check the temperature sensor's signal cable for a short to supply voltage and for a break. High voltage systems may only be handled by qualified personnel
    3. 3Do not carry out any measurements or work on the high voltage wiring yourself
    4. 4After the repair, read out the fault codes and check that the code is not stored again

    Symptome, die Sie bemerken können4

    • Warning symbol and text message in the display
    • Drive mode PURE disengages automatically or is unavailable
    • Drive mode AWD disengages automatically or is unavailable
    • Drive mode HYBRID: the combustion engine runs all the time or too often

    Was der Fehler beeinflussen kann1

    • Reduced performance of the electric rear axle

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.