VOLVO
IEM-B200685 - Electric Machine Temperature Sensor. Bus Signal / Message Failures. Signal above allowable range
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The code applies when the signal from the temperature sensors in the electric rear axle (ERAD) is above the permitted limit while the car is driven in gear D or R. The causes listed concern the cooling system, such as a low coolant level or a leak. Electric propulsion is then not possible.
Mögliche Ursachen
- Air or a leak in the cooling system
- Low coolant level
- Damaged cable or connection to the coolant pump
- Damaged electric cooling fan motor
- Damaged control module for the electric cooling fan
Was Sie tun können
- 1Check the coolant level and look for leaks or air in the cooling system
- 2Have a workshop check the cable and connection to the coolant pump and the electric cooling fan. High voltage systems may only be handled by qualified personnel
- 3Do not work on the high voltage system yourself
- 4After the repair, check that the code is not stored again and that the drive modes work as normal
Symptome, die Sie bemerken können4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Was der Fehler beeinflussen kann2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.