VOLVO
IEM-B200998 - Insulated Gate Bipolar Transistor. Component Failures. Component or system over temperature
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The code concerns over-temperature in the electric rear axle drive control module (IEM). The temperature sensors inside the control unit measure the high voltage transistors, and the code is set when one or more of the sensors shows a high temperature with the ignition on. It may be that the control module becomes too hot inside, or an internal fault in the voltage converter (ISC). Electric propulsion is then not possible.
Mögliche Ursachen
- Too high an internal temperature in the control module
- Internal fault in the voltage converter (ISC)
Was Sie tun können
- 1If you have a diagnostic tool: read the IEM temperature values in live data and see whether any sensor shows clearly more heat than the others
- 2Have a workshop check the electric rear axle drive control module and the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
- 3Do not carry out any work on the control module yourself
- 4After the repair, check that the code is not stored again
Symptome, die Sie bemerken können4
- Warning symbol and text message appear
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Was der Fehler beeinflussen kann2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.