VOLVO
IEM-B201213 - Phase Current Sensors. General Electrical Failures. Circuit open
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The phase current sensor in the voltage converter (ISC) gives a signal that is missing or incorrect. The code indicates an open circuit. The cause lies in the ISC, and electric propulsion is then not possible.
Mögliche Ursachen
- Internal fault in the voltage converter (ISC)
Was Sie tun können
- 1Have a workshop check the phase current sensor and its connectors in the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
- 2If you have a diagnostic tool: compare the phase currents with each other in live data while the car is in drive mode
- 3Do not carry out any work on the high voltage system yourself
- 4After the repair, check that the code is not stored again
Symptome, die Sie bemerken können4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Was der Fehler beeinflussen kann2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.