VOLVO
IEM-B201254 - Phase Current Sensors. System Programming Failures. Missing calibration
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The electric rear axle drive control module (IEM) calibrates its current sensors automatically. The code is set when the automatic calibration fails in drive mode, that is, once the car has started. The causes are that the control module has been restarted while the electric rear axle (ERAD) was not stationary, a software fault in the IEM, or an internal fault in the voltage converter (ISC). Electric propulsion is then not possible.
Mögliche Ursachen
- The control module was restarted while the electric rear axle (ERAD) was not stationary
- Software fault in the electric rear axle drive control module (IEM)
- Internal fault in the voltage converter (ISC)
Was Sie tun können
- 1Have a workshop calibrate the current sensors in the electric rear axle drive control module. High voltage systems may only be handled by qualified personnel
- 2If you have a diagnostic tool: read the fault codes after a drive in drive mode and see whether the code is set again
- 3Have a workshop download new software to the IEM if the fault remains
- 4After the repair, check that the code is not stored again
Symptome, die Sie bemerken können4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Was der Fehler beeinflussen kann2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.