VOLVO
IEM-P060667 - Control module processor. Algorithm Based Failures. Signal incorrect after event
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The electric rear axle drive control module (IEM) has detected an internal fault in its microprocessor. The fault is set with the ignition on once the control module's test has started. The causes are a software fault in the IEM or an internal fault in the voltage converter (ISC). Electric propulsion is then not possible.
Mögliche Ursachen
- Software fault in the electric rear axle drive control module (IEM)
- Internal fault in the voltage converter (ISC)
Was Sie tun können
- 1Have a workshop download new software to the IEM and check that the download completes. High voltage systems may only be handled by qualified personnel
- 2Have a workshop check the voltage converter (ISC) if the fault remains
- 3Do not carry out any work on the high voltage system yourself
- 4After the repair, read the fault codes with the ignition on and check that the code is not stored again
Symptome, die Sie bemerken können4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Was der Fehler beeinflussen kann2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.