Was bedeutet der Fehlercode IEM-P117127?

Diagnose und Fehlercodedefinition für IEM-P117127 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

IEM-P117127 - Rotor Sensor. General Signal Failures. Signal rate of change above threshold

System

Unbekanntes System / Herstellerspezifisch

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

Although the code is named rate of change, it applies when the signal from the angle sensor in the electric rear axle (ERAD) falls beyond the accepted tolerance band. The control module (IEM) checks the calibrated limits through the sensor and sets the code while driving in gear D or R. The fault may lie in the wiring between the ERAD and the voltage converter (ISC), in the sensor, or in the ISC. Electric propulsion is then not possible.

Mögliche Ursachen

Loose contacts, contact resistance or oxidation at the connections between the ERAD and the voltage converter (ISC)
Open circuit in the signal cable
Signal cable short-circuited to supply voltage
Damaged wiring between the ERAD and the ISC
Internal fault in the electric rear axle (ERAD)
Internal fault in the voltage converter (ISC)

Was Sie tun können

1Have a workshop check the wiring between the electric rear axle and the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
2If you have a diagnostic tool: look at the angle sensor value in live data and see whether it jumps more often than expected while driving
3Have a workshop read the fault codes in the electric rear axle and check the sensor. Do not work on it yourself
4After the repair, check that the code is not stored again while driving in gear D or R

Symptome, die Sie bemerken können4

Warning window with a warning symbol and text message
Drive mode PURE disengages automatically or is unavailable
Drive mode AWD disengages automatically or is unavailable
Drive mode HYBRID: the combustion engine runs all the time or too often

Was der Fehler beeinflussen kann2

Electric propulsion is not possible
Brake energy regeneration from the electric rear axle is not possible

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.