Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    IEM-P117164
    VOLVO

    IEM-P117164 - Rotor Sensor. Algorithm Based Failures. Signal plausibility failure

    System

    Unbekanntes System / Herstellerspezifisch

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    1 Modell

    V60 (2011–)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo V60 (2011–)2013–2014Nur Motor: D82PHEV
    • Volvo V60 (2011–)2015Nur Motor: D82PHEV, D87PHEV

    Was bedeutet der Fehlercode?

    Although the code is named implausible signal, it applies when the signal from the angle sensor in the electric rear axle (ERAD) falls outside the permitted tolerance range. The fault is set while driving in gear D or R. The causes may be lost calibration, a jammed clutch in the rear axle, wiring faults, or internal faults in the ERAD or ISC. Electric propulsion is then not possible.

    Mögliche Ursachen

    • Lost calibration
    • The clutch in the electric rear axle has jammed
    • Loose contacts, contact resistance or oxidation at the connections between the ERAD and the voltage converter (ISC), or damaged wiring between them
    • Signal cable short-circuited to ground, to supply voltage, or with an open circuit
    • Internal fault in the electric rear axle (ERAD)
    • Internal fault in the voltage converter (ISC)

    Was Sie tun können

    1. 1Have a workshop recalibrate the angle sensor and check the clutch in the electric rear axle. High voltage systems may only be handled by qualified personnel
    2. 2If you have a diagnostic tool: look at the angle sensor value in live data while the car is driven in gear D or R and see whether it looks implausible
    3. 3Do not work on the electric rear axle yourself
    4. 4After the repair, check that the code is not stored again

    Symptome, die Sie bemerken können4

    • Text window and warning symbol with a text message
    • Drive mode PURE disengages automatically or is unavailable
    • Drive mode AWD disengages automatically or is unavailable
    • Drive mode HYBRID: the combustion engine runs all the time or too often

    Was der Fehler beeinflussen kann2

    • Electric propulsion is not possible
    • Brake energy regeneration from the electric rear axle is not possible

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.