IEM-P117177
VOLVO
IEM-P117177 - Rotor Sensor. Mechanical Failures. Commanded position not reachable
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
Although the code is named mechanical failure, it applies when the position sensor in the electric rear axle (ERAD) is not functioning. The fault is set while driving in gear D or R. The causes are wiring faults between the ERAD and the voltage converter (ISC), a signal cable that is short-circuited or broken, or internal faults in the ERAD or ISC. Electric propulsion is then not possible.
Mögliche Ursachen
- Loose contacts, contact resistance or oxidation at the connections between the ERAD and the voltage converter (ISC)
- Signal cable short-circuited to supply voltage
- Signal cable short-circuited to ground
- Open circuit in the signal cable
- Damaged wiring between the ERAD and the ISC
- Internal fault in the electric rear axle (ERAD) or in the voltage converter (ISC)
Was Sie tun können
- 1Have a workshop check the signal wire and connectors between the electric rear axle and the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
- 2If you have a diagnostic tool: look at the position sensor value in live data during a drive in gear D or R
- 3Do not work on the wiring to the electric rear axle yourself
- 4After the repair, check that the code is not stored again while driving
Symptome, die Sie bemerken können4
- Warning window with a warning symbol and text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Was der Fehler beeinflussen kann2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.