Was bedeutet der Fehlercode IEM-P181E95?

Diagnose und Fehlercodedefinition für IEM-P181E95 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

IEM-P181E95 - Clutch Actuator Range/Performance. Component Failures. Incorrect assembly

System

Unbekanntes System / Herstellerspezifisch

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

Although the code is named incorrectly assembled, it applies when the clutch control for the electric rear axle (DCC) has registered minor faults, or when its temperature is too high. The driver notices no symptoms, and the car is not affected by the code. The causes are poor cooling of the electric rear axle, a software fault in the IEM, a damaged DCC, or an internal fault in the electric rear axle.

Mögliche Ursachen

Poor cooling of the electric rear axle (ERAD)
Software fault in the electric rear axle drive control module (IEM)
The clutch control for the electric rear axle (DCC) is damaged
Internal fault in the electric rear axle (ERAD)

Was Sie tun können

1Check the coolant level and look for leaks, since poor cooling of the electric rear axle is one of the causes
2Have a workshop check the clutch control for the electric rear axle (DCC) and download new software to the IEM if needed. High voltage systems may only be handled by qualified personnel
3Do not carry out any work on the clutch control or the electric rear axle yourself
4After the repair, check that the code is not stored again

Symptome, die Sie bemerken können1

No noticeable symptoms for the driver

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.