VOLVO
IEM-U041268 - Invalid Data Received From Battery Energy Control Module (BECM). Algorithm Based Failures. Event information
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The electric rear axle drive module (IEM) is not getting at least one signal from BECM, the battery energy control module. The fault is only checked once the test has started at ignition on, and the code is stored when the conditions are met.
Mögliche Ursachen
- Oxidation, contact resistance or loose contacts at the terminals to Sensor CAN
- Damaged cables on Sensor CAN
- Software error in the electric rear axle drive module (IEM)
- Software fault in the BECM (battery energy control module)
- Internal fault inside the ISC voltage converter
Was Sie tun können
- 1Read out and note the code, clear it and road test to see whether it returns
- 2Have a workshop check that the connectors to Sensor CAN are fully engaged and free from corrosion
- 3Have a workshop check chafed or damaged CAN cables
- 4Have a workshop with diagnostic equipment check communication with the battery energy control module and load the latest software to the control modules if needed
- 5Do not work on the electric rear axle or the battery high voltage system yourself; have a workshop carry out those checks
Symptome, die Sie bemerken können4
- Warning symbol and text message in the display
- PURE drive mode disengages by itself or is not available
- AWD drive mode disengages by itself or is not available
- HYBRID drive mode runs with the combustion engine active all the time or too often
Was der Fehler beeinflussen kann2
- Electric propulsion is not possible
- Brake energy recovery from the electric rear axle ERAD is not possible
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.