Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    IGM-B200764
    VOLVO

    IGM-B200764 - Insulated Gate Bipolar Transistor Temperature Sensor. Algorithm Based Failures. Signal plausibility failure

    System

    Unbekanntes System / Herstellerspezifisch

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    1 Modell

    V60 (2011–)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo V60 (2011–)2013–2014Nur Motor: D82PHEV
    • Volvo V60 (2011–)2015Nur Motor: D82PHEV, D87PHEV

    Was bedeutet der Fehlercode?

    The high voltage generator control module (IGM) measures the temperature of its high voltage transistors with three temperature sensors built into the control module. The code is stored when the signals from these sensors fall outside the permitted range given how the starter generator ISG has been used. The fault is only checked once the test has started at ignition on.

    Mögliche Ursachen

    • Air or leakage in the cooling system, or a low coolant level
    • Damaged cable or connection to the coolant pump
    • Damaged coolant pump
    • Software fault in the IGM
    • Software fault in the engine control module (ECM)
    • Internal fault inside the ISC voltage converter

    Was Sie tun können

    1. 1Read out, clear the code, start the car and road test to see whether it returns
    2. 2Check the coolant level and look for leaks in the cooling system
    3. 3Have a workshop look over the cable and connector to the coolant pump for damage and make sure they are fully seated
    4. 4Have a workshop check the coolant pump and whether new software is available for the IGM and the engine control module
    5. 5The high voltage system may only be handled by a workshop; do not work on it yourself

    Symptome, die Sie bemerken können5

    • Warning symbol and text message in the display
    • Warning about power supply problems from the alternator and charge regulator
    • Charging of the high voltage battery while driving is absent, reduced or not working correctly
    • High voltage battery is discharged or charges poorly
    • HYBRID drive mode: the combustion engine is active all the time or too often

    Was der Fehler beeinflussen kann1

    • The high voltage battery cannot be charged by the combustion engine

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.