Was bedeutet der Fehlercode IGM-C200D84?

Diagnose und Fehlercodedefinition für IGM-C200D84 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

IGM-C200D84 - Motor Rotation Angle Sensor. Bus Signal / Message Failures. Signal below allowable range

System

Unbekanntes System / Herstellerspezifisch

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

The high voltage generator control module (IGM) monitors the internal components and functions of the starter generator ISG. The code is stored when the speed signal from the ISG indicates that it is rotating backwards, or when the speed is below a limit. The fault is only checked once the combustion engine is running.

Mögliche Ursachen

Calibration not completed
Calibration has failed
Calibration or parameter memory is incorrect, incompatible or not programmed
The position sensor on the ISG is installed incorrectly

Was Sie tun können

1Read out and note the code, clear it and road test with the engine running
2Have a workshop check the calibration of the ISG and that the calibration memory is correctly programmed
3Have a workshop check that the position sensor on the ISG is fitted correctly
4The high voltage system may only be handled by a workshop; do not work on it yourself

Symptome, die Sie bemerken können5

Warning symbol and text message in the display
Warning about power supply problems from the alternator and charge regulator
Charging of the high voltage battery while driving is absent, reduced or not working correctly
High voltage battery is discharged or charges poorly
HYBRID drive mode: the combustion engine is active all the time or too often

Was der Fehler beeinflussen kann1

The high voltage battery cannot be charged by the combustion engine

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.