VOLVO
IGM-P0A5D19 - Drive Motor "A" Phase U Current. General Electrical Failures. Circuit current above threshold
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The high voltage generator control module (IGM) supervises the voltage and current feed to the starter generator ISG. The code is stored when the current in any of the phases feeding the ISG is too high. The code names phase U, but the condition applies to one or more phases. The fault is only checked while the combustion engine is running.
Mögliche Ursachen
- Oxidation, contact resistance or loose contacts at the connections between the ISG and the ISC
- A short circuit from the high voltage cable to ground
- Break in the high voltage cable
- Wiring between the ISG and the ISC is damaged
- Internal fault inside the ISG starter generator
- Internal fault inside the ISC voltage converter
Was Sie tun können
- 1Read out, clear the code and road test with the engine running to see whether it returns
- 2Have a workshop check the high voltage cable and the wiring between the ISG and the ISC
- 3If nothing is found in the wiring, have a workshop check the starter generator ISG and the ISC voltage converter
- 4The high voltage system may only be handled by a workshop; do not work on it yourself
Symptome, die Sie bemerken können5
- Warning symbol and text message in the display
- Warning about power supply problems from the alternator and charge regulator
- Charging of the high voltage battery while driving is absent, reduced or not working correctly
- High voltage battery is discharged or charges poorly
- HYBRID drive mode: the combustion engine is active all the time or too often
Was der Fehler beeinflussen kann1
- The high voltage battery cannot be charged by the combustion engine
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.