VOLVO
KVM-0022 - Switch unlocking left rear. Signal missing
System
Keyless-Entry-Modul (KVM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The keyless vehicle module (KVM) compares the signals from the switch in the door handle and the switch in the lock cylinder on the left rear door. The code is stored when the lock cylinder switch is activated before the handle switch has registered. The fault name says signal missing, but the handle switch is the one treated as faulty, which can make the door slow to unlock.
Mögliche Ursachen
- The left rear door handle switch is faulty
- Open circuit in the wiring between the module and the left rear handle switch
- The signal wire has a short to ground
Was Sie tun können
- 1Read and note the code, clear it, then pull the left rear handle and check whether the door unlocks immediately
- 2With the ignition off, use a multimeter to check that the wire between the KVM and the handle switch has no open circuit and no connection to ground (the body)
- 3Make sure the ground point is firmly fixed and free from oxidation, and that the ground wire between the handle and the ground point is intact
- 4If you have a diagnostic tool: pull the handle out and check that the handle switch value in live data shows activated
- 5Have a workshop replace the door handle if no other fault is found
Symptome, die Sie bemerken können1
- The door unlocks with a delay
Was der Fehler beeinflussen kann1
- The keyless vehicle module (KVM) does not send the unlock signal to the central locking straight away when the handle is pulled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.