VOLVO
KVM-B102B00 - Passive Key. General Failure Information. No sub type information
System
Keyless-Entry-Modul (KVM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
When the start button is pressed, the keyless vehicle module (KVM) uses antennas in the cabin and the luggage compartment to look for a valid key. The code is stored when the remote key's ID is not valid or the reply is not recognised. The code does not say what type of fault it is, so troubleshooting has to be broad.
Mögliche Ursachen
- Incorrect reply from the remote key
- The remote receiver is not working
Was Sie tun können
- 1Read the codes and deal first with those relating to lost communication with the receiver
- 2Note whether the remote stops working in some places. Strong radio transmitters or mobile phones can, rarely, block the remote key signal
- 3Try several remote keys to see whether the fault follows one particular key
- 4If only one key shows the fault, have a workshop reprogram the keys, with all keys present
- 5Have a workshop confirm that the newest software is loaded in the CEM and in the KVM
Symptome, die Sie bemerken können2
- Keyless functions do not work at all or work poorly
- The engine does not start
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.