VOLVO
KVM-B10CD24 - Left rear Latch clutch switch. General Signal Failures. Signal stuck high
System
Keyless-Entry-Modul (KVM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The switch for the left rear lock cylinder has been activated for too long, meaning its signal has stayed high. The code is stored when the time becomes too long, and it points to the switch, the handle or the wiring. The driver usually does not notice the code.
Mögliche Ursachen
- Damaged switch
- The left rear handle has been held pulled out for an unusually long time
- The signal wire has a short to ground
Was Sie tun können
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the handle returns to its rest position and is not damaged or held by dirt or ice
- 3With the ignition off, use a multimeter to check that the wire to the switch is not connected to ground (the body)
- 4With a diagnostic tool, read the switch value in live data while you use the lock cylinder, and check it changes
- 5Have a workshop replace the switch if it is damaged and the wire is sound
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.