VOLVO
KVM-B10D124 - Left front Lock button. General Signal Failures. Signal stuck high
System
Keyless-Entry-Modul (KVM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The lock button on the outer side of the left front door starts a timer when pressed. If the button has been held down for too long, the code is stored, and the car cannot then be locked with the outer lock button. The fault lies in the switch, the button or the wiring.
Mögliche Ursachen
- The switch is faulty
- The lock button has been held pressed for an unusually long time
- The signal wire has a short to ground
Was Sie tun können
- 1Read and note the code, clear it and press the left front button to see whether locking works
- 2Check that the button returns fully when released and does not stick or appear damaged
- 3With the ignition off, use a multimeter to check that the wire to the button is not connected to ground (the body)
- 4If you have a diagnostic tool: press the button and check that its value in live data changes between activated and inactive
- 5Have a workshop replace the button if it is faulty and the wire is sound
Symptome, die Sie bemerken können1
- Locking with the outer lock button does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.