VOLVO
KVM-U201B54 - Control Module Calibration Data #2. System Programming Failures. Missing calibration
System
Keyless-Entry-Modul (KVM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The code concerns calibration data no. 2 in the keyless vehicle module (KVM). The module checks that a local configuration file is present, and the code is set when that file is missing or incorrect. Standard values are then used instead of the car's own settings.
Mögliche Ursachen
- The configuration file in the keyless module (KVM) is faulty
- Local configuration file missing from the keyless vehicle module (KVM)
Was Sie tun können
- 1Read the codes, clear them and road test the car to see whether the code comes back
- 2Check that the battery is in good condition and that its terminals are tight
- 3Check that the connectors on the keyless vehicle module (KVM) are fully engaged and free from oxidation
- 4Have a workshop load fresh software into the keyless vehicle module (KVM); the code concerns the local configuration file itself
- 5If new software does not help, the keyless vehicle module (KVM) needs replacing, which is a workshop job
Symptome, die Sie bemerken können2
- Locking, unlocking and central locking do not work
- The car will not start, the engine does not start or does not turn over; the problems may show at all times or only now and then
Was der Fehler beeinflussen kann1
- Standard values are used instead of the car's own settings
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.