Was bedeutet der Fehlercode OBC-P0D6781?

Diagnose und Fehlercodedefinition für OBC-P0D6781 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

OBC-P0D6781 - Battery Charger Control Module Performance. Bus Signal / Message Failures. Invalid serial data received

System

Bordladegerät (OBC)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

The battery charger control module (OBC) monitors its internal functions and its communication with the gateway. The fault is set when the control module detects an internal fault or when communication is missing. The fault is caused by damaged charging components, and charging the high voltage battery is not possible while it remains.

Mögliche Ursachen

Charging components are damaged

Was Sie tun können

1Read out and erase the fault code, charge again and see whether it comes back
2Check that the charging cable is not damaged and that the correct type of charging cable is used
3Have a workshop check that the charging socket in the car is not damaged and that the cable is fully seated in it
4Have a workshop check the wiring between the charging socket and the control module OBC, and the charging components. The high voltage system may only be handled by authorised personnel

Symptome, die Sie bemerken können2

Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
The LED on the charging cable or the charging socket shows a fault and charging is reduced

Was der Fehler beeinflussen kann1

Charging the high voltage battery is not possible

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.