Was bedeutet der Fehlercode OBC-P0D9038?

Diagnose und Fehlercodedefinition für OBC-P0D9038 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

OBC-P0D9038 - Battery Charger Input Frequency Incorrect. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. Signal frequency incorrect

System

Bordladegerät (OBC)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

The frequency of the pilot signal between the charging cable and the control module OBC is wrong. The fault can be set when the cable is plugged in and its switch is turned on. A defective charging cable or a damaged charging socket can cause it. Charging is not possible while the fault remains.

Mögliche Ursachen

The charging cable is defective
The charging socket is defective

Was Sie tun können

1Read out and erase the fault code, charge again and see whether it comes back
2Check that the switch on the charging cable is on when you connect it
3Check that the charging cable is not damaged, for example chafing, kinks or burnt connectors
4Have a workshop check that the charging socket in the car is clean and undamaged and that the cable is fully seated in it
5The high voltage system may only be handled by authorised personnel. Do not work on it yourself; have a workshop check the charging if the fault remains

Symptome, die Sie bemerken können3

A text message and a warning symbol are shown in the display
Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
The LED on the charging cable or the charging socket shows a fault

Was der Fehler beeinflussen kann1

Charging the high voltage battery is not possible

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.