VOLVO
PAC-B100E81 - Video Input "A". Bus Signal / Message Failures. Invalid serial data received
System
Antriebsstrang (Motor & Getriebe)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The parking assistance camera module (PAC) passes the picture from the camera on to the control module for the front display. The fault is set when the video signal is faulty. The fault can come from a loose connection where the video cable attaches, a damaged wire, a damaged camera or a damaged control module.
Mögliche Ursachen
- Poor contact where the video cable attaches to the camera or control module
- Damaged wire
- Damaged camera
- Damaged control module
Was Sie tun können
- 1Check that the fuses are intact and that the video cable connectors are firmly seated and not oxidised
- 2Check that the wire between the camera and the control module is not chafed or damaged
- 3Read out and erase the fault code, test drive with reverse gear engaged and see whether it comes back
- 4If the fault remains, have a workshop check the camera and the control module
Symptome, die Sie bemerken können1
- Front and rear park assist does not work
Was der Fehler beeinflussen kann1
- The control module for the front display (HLDF) shows a single-colour picture
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.