VOLVO
PAC-B100E87 - Video Input "A". Bus Signal / Message Failures. Missing message
System
Antriebsstrang (Motor & Getriebe)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The parking assistance camera module (PAC) passes the picture from the camera on to the control module for the front display. The fault is set when the video signal from the camera is missing. The fault can come from a loose connection, a damaged wire, the camera receiving no power or a damaged camera.
Mögliche Ursachen
- Poor contact where the video cable attaches to the camera or control module
- Damaged wire between the control module and the camera
- The camera receives no power
- Damaged wire
- Damaged camera
Was Sie tun können
- 1Check that the fuses are intact and that the connectors at the camera and the control module are firmly seated and not oxidised
- 2Check that the wire between the control module and the camera is not damaged
- 3Read out and erase the fault code, test drive with reverse gear engaged and see whether it comes back
- 4Have a workshop check that the camera receives power, and replace it if it is damaged
Symptome, die Sie bemerken können1
- Front and rear park assist does not work
Was der Fehler beeinflussen kann1
- The control module for the front display (HLDF) shows a single-colour picture
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.