VOLVO
PAC-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Antriebsstrang (Motor & Getriebe)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
8 ModelleS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The parking assistance camera module (PAC) should be told the car's current setup by the central electronic module (CEM). The fault is set when the configuration file from the CEM does not arrive in time. It is caused by the communication with the CEM being interrupted, and the parking camera does not work while the fault remains.
Mögliche Ursachen
- Communication with the central electronic module (CEM) is interrupted
Was Sie tun können
- 1Erase the fault code and test drive the car. If it comes back, the communication with the CEM is probably still interrupted
- 2Check that the connectors on the CAN wires are firmly seated and not oxidised
- 3Have a workshop trace the fault in the CAN network between the parking camera and the central electronic module (CEM)
Symptome, die Sie bemerken können1
- The parking camera does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.