VOLVO
PAC-U300083 - Control Module. Bus Signal / Message Failures. Value of signal protection calculation incorrect
System
Antriebsstrang (Motor & Getriebe)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The signals that the parking assistance camera module (PAC) receives over the CAN network do not check out, according to the checksum that protects the signal. The fault is set when the received signals are incorrect, and the cause is an internal fault in the control module. The picture on the front display may then be wrong or missing.
Mögliche Ursachen
- Internal fault in the control module
Was Sie tun können
- 1Check that the fuses are intact
- 2Erase the fault code and test drive with reverse gear engaged to see whether it comes back
- 3The fault is in the control module itself, so you cannot fix it. Have a workshop check the parking camera and replace it if needed
Symptome, die Sie bemerken können1
- Front and rear park assist does not work
Was der Fehler beeinflussen kann3
- The control module for the front display (HLDF) shows a single-colour picture
- The control module for the front display (HLDF) shows no picture
- The guide lines that show the car's position sideways are drawn completely straight, whatever the steering wheel angle
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.