VOLVO
PAM-U030000 - Internal Control Module Software Incompatibility. General Failure Information. No sub type information
System
Parkassistent (PAM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (6)
Was bedeutet der Fehlercode?
The parking assistance module's internal software does not match the car, so its configuration ID differs from the one the central electronic module (CEM) sends out on the CAN network. The fault may be caused by a used control module having been fitted, or by a break in the CAN wires between the parking assistance module and the CEM.
Mögliche Ursachen
- Incorrect configuration ID, since the unit was never meant for this car, for instance a second-hand unit with other software or hardware
- Open circuit in the CAN wires between the parking assistance module and the central electronic module (CEM)
Was Sie tun können
- 1Read and clear the code, then test drive the car to see whether it comes back
- 2Consider whether the parking assistance module is a used control module that has been fitted to the car
- 3If you have a diagnostic tool, check whether communication codes are stored in the central electronic module (CEM); if they are, start the fault tracing there
- 4Check that the connectors on the CAN wires to the parking assistance module are firmly seated and free from oxidation
- 5Have a workshop load the parking assistance module with the software that is right for the car, as this is a programming job
- 6If the code comes back, have a workshop check the CAN wires between the parking assistance module and the CEM
Symptome, die Sie bemerken können3
- The parking assistance system does not work
- The information lamp is lit
- Message in the text display
Was der Fehler beeinflussen kann2
- The parking assistance module switches itself off from the CAN network (bus-off)
- While the code is stored, the module responds to diagnostic commands, but the normal CAN communication does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.