PAM-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Parkassistent (PAM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The parking assistance module has not received information about the car's current configuration from the central electronic module (CEM), so the configuration is not complete. The fault points to contact resistance, oxidation, a break or a loose contact in the connections to the CAN network, and the central electronic module should be traced first.
Mögliche Ursachen
- Contact resistance, oxidation, a break or a loose contact in the connections to the CAN network
- The fault lies in the sending control module, the central electronic module (CEM)
Was Sie tun können
- 1Read and clear the code, then test drive the car to see whether it comes back
- 2If you have a diagnostic tool, check first whether codes are stored in the central electronic module (CEM)
- 3Check that the connections to the CAN network, at the parking assistance module and at the central electronic module, are firmly seated and free from oxidation
- 4Have a workshop check the CAN wires between the parking assistance module and the central electronic module for breaks
- 5Have a workshop trace the central electronic module and replace it only if it has an internal fault
Symptome, die Sie bemerken können3
- Front or rear parking assistance does not work
- Yellow warning symbol and text message in the display
- Text message in the display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.