VOLVO
PBM-P061E67 - Internal Control Module Brake Signal Performance. Algorithm Based Failures. Signal incorrect after event
System
Antriebsstrang (Motor & Getriebe)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The parking brake module (PBM) continuously receives brake system information from the brake control module (BCM) and from the central electronic module (CEM) over the CAN bus. The fault code is stored when the information from either of them has a lower quality than the parking brake module accepts for a longer time, or when communication with the CEM stops. The fault therefore lies in the information from another control module.
Mögliche Ursachen
- Fault in the control module that sends the information, for example the brake control module (BCM) or the CEM
Was Sie tun können
- 1Read the fault code, clear it and test drive the car using the parking brake to see whether it returns
- 2If you have a diagnostic tool: check whether the brake control module (BCM) and the CEM also have fault codes, since faults often show up in several control modules
- 3Check that the connectors at the parking brake control module are firmly fitted and not corroded
- 4If the fault returns, have a workshop troubleshoot the control module that sends the faulty information
- 5The parking brake is a safety function: have a workshop check it if it does not work as it should
Symptome, die Sie bemerken können3
- Information lamp is on
- Message in the text display
- Electric parking brake works with reduced function
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.