Was bedeutet der Fehlercode PDM-0025?

Diagnose und Fehlercodedefinition für PDM-0025 (Volvo C30 (2007–2013), Volvo C30 Electric (2011–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

PDM-0025 - LED, camera module Signal too low

System

Beifahrertürmodul (PDM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

This code concerns the BLIS system, where a camera sits in each external mirror. The passenger door module (PDM) talks to the camera on the passenger side over LIN and monitors the power supply to the LED. The fault code is stored when the supply wire to the LED is shorted to ground.

Mögliche Ursachen

The supply wire to the LED is shorted to ground

Was Sie tun können

1Start the engine and activate the BLIS system; check that the LED flashes three times
2Look at the LED connector and wire for chafing or damage
3With a multimeter, check that the wire to the LED is not touching ground (the body)
4If the fault code does not return, no further action is needed; otherwise have a workshop check the LED and its wiring

Symptome, die Sie bemerken können2

The LED does not light
Message in the text display

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.