Was bedeutet der Fehlercode PDM-B108F23?

Diagnose und Fehlercodedefinition für PDM-B108F23 (Volvo S80 (2007–), Volvo V70 (2008–), Volvo XC60 (2009–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

PDM-B108F23 - Cabin Lock/Unlock Switch. General Signal Failures. Signal stuck low

System

Beifahrertürmodul (PDM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (4)

Was bedeutet der Fehlercode?

The door modules on the driver and passenger sides monitor the central lock switch in the cabin. The fault is stored if the button has been held pressed for more than two minutes, and then the central locking does not work at all.

Mögliche Ursachen

Button has jammed in the pressed-in position
Control panel is damaged

Was Sie tun können

1Check that the central lock button is not stuck in the pressed-in position and that it returns when you release it
2Look for damage to the control panel around the button
3Check that the fuses are intact
4If you have a diagnostic tool, see in live data that the signal from the central lock button changes when you press and release the button
5After the work, check that the central locking locks and unlocks the car when you use the button

Symptome, die Sie bemerken können1

Central locking does not work at all

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.