VOLVO
PDM-B10EC15 - Passenger door double locking motor. General Electrical Failures. Circuit short to battery or open
System
Beifahrertürmodul (PDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The passenger door module (PDM) supplies the central locking motor, the lock motor for the deadlock position and the electrically folding door mirror in the driver's door. The control module has registered that the signal from the output is too high when the lock motor for the deadlock position is activated. The fault may be caused by the supply cable being short-circuited to supply voltage or having an open circuit, and then the deadlock position cannot be activated.
Mögliche Ursachen
- Power supply cable short-circuited to supply voltage
- Open circuit in the power supply cable
- Contact resistance, oxidation or poor contact in the connections
- Open circuit in the cable between the control module and the central locking motor
- Cable between the control module and the central locking motor short-circuited to supply voltage
- Open circuit or short to supply voltage on the cable to the common lock motor
Was Sie tun können
- 1Check that the relevant fuses are intact
- 2With a diagnostic tool, read the fault codes in the passenger door, and remedy any lock motor or mirror codes first
- 3Try the central locking and the mirrors to see which functions do not work
- 4Look for damage, moisture and oxidation in the connectors and in the wiring to the central locking motor in the passenger door
- 5Use a multimeter to check that the wire to the central locking motor has no open circuit and no contact with supply voltage or ground. If a fault is found, remedy it
- 6After the work, check that the central locking works and that the fault code does not return
Symptome, die Sie bemerken können4
- Does not go into the deadlock position
- Central locking does not work when locking and unlocking
- Electric adjustment of the door mirrors does not work
- Folding of the door mirrors does not work
Was der Fehler beeinflussen kann1
- While the fault is active, folding and electric adjustment of the door mirrors are blocked to prevent the car being locked unintentionally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.